Ancient Egyptian worker ushabti

Made in Thebes, Egypt, 1070 - 945 BC.

Egyptian ushabtis, also commonly referred to as shawabti or shabtis (meaning “answerer”), are funerary figurines, usually mummiform in shape, which were buried with the deceased in their tomb. The purpose of ushabtis was to perform the laborious tasks required for the production of food for their owners in the afterlife (such as sowing seeds, harvesting crops and irrigating the land). Ushabtis were used by both royal and non-royal Egyptians.

This ushabti provides a representative example for th...

Summary

Object No.

11105-2

Physical Description

Male mummiform figure made of Egyptian faience with a matt, pale turquoise-blue finish. The figure is shown wearing a headdress and faded black painted 'seshed' headband knotted at the back. The body is wrapped in bandages with only the head and arms visible, which are crossed right over left at the chest. Two moulded hoes are shown in each of the figure's hands and traces of illegible black painted hieroglyphs appear in a column down the front of the body.

Marks

Illegible

Dimensions

Height

95 mm

Width

30 mm

Depth

25 mm

Production

Notes

This ushabti is made from Egyptian faience and dates to the Third Intermediate Period (1070 - 945 BC). It possibly originates from Thebes (modern day Luxor) in Upper Egypt.

Egyptian faience is a non-clay ceramic made up of quartz (obtained from sand, flint or crushed quartz pebbles), an alkali (such as plant ash or natron), lime and ground copper.
These materials, when mixed with water, form a malleable paste which can be hand-modelled or moulded into various shapes and sizes. When fired, the quartz body develops a blue-green glassy surface, the characteristic attribute of faience, which the ancient Egyptians believed was symbolic of life, rebirth and immortality.

While the processes of faience production are missing from the visual record, experimental archaeology has prompted Egyptologists to assert that four main stages were involved. This includes obtaining the high-quality materials; preparing the faience quartz paste; hand-forming or mould-making the object and then firing it in a kiln. It is likely that this work would have been undertaken by more than one person, presumably labourers, craftsmen and artisans and, most probably, in the same workshop where other goods, such as pottery and glass, were manufactured.

After firing, the faience is glazed using one of three methods - efflorescence, cementation or application. Efflorescence is a self-glazing technique in which soluble salts are mixed with the raw quartz. During the drying stage, the salts migrate to the surface and when fired, they melt to become a glaze. Cementation is another self-glazing technique, where the object is submerged in glazing powder and upon firing, becomes fused to the surface. Application, on the other hand, involves immersing the object into a mixture of glazing powder or hand-painting.

During the Third Intermediate Period, Egyptian ushabtis (such as this example) were mass produced from moulds. The black handpainted details were applied before the ushabtis was fired in a kiln at 800-1000 degrees temperature. This particular ushabtis would have been glazed using the application technique.

Made

1070 - 945 BC

History

Notes

Egyptian faience first appeared in the Late Predynastic period (3500BC) and was used all the way up until the Ptolemaic period (30BC). Although faience was used in many strata of society, it was essentially a luxury product and according to some Egyptologists, was initially developed as an inexpensive substitute for lapis-lazuli.

The use of Egyptian faience in ushabtis did not occur until the Middle Kingdom. Prior to this, they were made from wood and developed out of the crude models of servants which were produced for tomb owners in the Old Kingdom. The purpose of ushabtis at this time was to represent the deceased owner and perform the laborious tasks for him of hunting and preparing food, irrigating the land and harvesting crops in the afterlife. Until the end of the Middle Kingdom, the deceased was normally buried with about 1-4 ushabtis and between 10 and 40 in the New Kingdom.

By the Third Intermediate Period, the function of ushabtis changed. They were now divided into 'worker' ushabtis and 'overseer' ushabtis and most individuals were buried with up to 401 of them (365 'worker' ushabtis, one for everyday of the year and 36 'overseer' ushabtis who instructed the 'worker' ushabtis what to do). Thus, ushabtis were now being mass-produced and were perceived more as slaves of the deceased owner, rather than substitutes for them.

Ushabtis lost their resonance for the Egyptian people during the Late Period and with the decline of the Osirian cult and gradual inability for people to write hieroglyphs in the Ptolemaic Period, they eventually disappeared altogether.

This ushabti was donated to the Museum in 1886.

Used

Cite this Object

Harvard

Ancient Egyptian worker ushabti 2017, Museum of Applied Arts & Sciences, accessed 22 February 2018, <https://ma.as/1314>

Wikipedia

{{cite web |url=https://ma.as/1314 |title=Ancient Egyptian worker ushabti |author=Museum of Applied Arts & Sciences |access-date=22 February 2018 |publisher=Museum of Applied Arts & Sciences, Australia}}

Know more about this object?

TELL US

Have a question about this object?

ASK US